Wood-Finish Aluminium Pergola
The strength and low maintenance of aluminium combined with a premium wood-look architectural finish.
Wood-Finish Aluminium Pergola engineered for its actual setting.
The strength and low maintenance of aluminium combined with a premium wood-look architectural finish.
Villas, resorts, restaurants, gardens, pool areas and hospitality projects requiring a warm natural appearance.
Wood-look finish code, texture, gloss, UV durability and touch-up limitations must match the approved sample.
Every proposal is coordinated with verified dimensions, support locations, clear height, access, drainage, lighting, utilities, finishes and the client-approved architectural intent.
Architecture, roof system and construction details.
Verified project photographs can replace these design placeholders when supplied.
*Illustrative layout only. Final geometry follows approved drawings.
Materials, structure and interfaces defined before production.
Exact grades, sections, brands and performance values follow the approved quotation, submittal and drawings.
| Primary Structure | Extruded aluminium posts, beams and louvers finished with an approved wood-grain powder coating or sublimation system. | Member sizes follow approved geometry, loading, deflection limits and support conditions. |
|---|---|---|
| Roof System | Product-specific louvers, slats, retractable fabric, PVC/PVDF membrane or mixed architectural roofing as selected. | Weather protection, ventilation, solar control, fire data, UV performance and maintenance requirements are reviewed. |
| Materials | Project-approved aluminium alloy/temper, structural steel, stainless hardware and membrane or fabric grade. | Certificates, samples and manufacturer data are provided where included in scope. |
| Finish | Powder coating, wood-look finish, hot-dip galvanizing plus compatible epoxy/top coat, or approved paint system. | Color, gloss, texture, preparation and coating thickness follow the approved finish schedule. |
| Connections | Engineered brackets, plates, bolts, welds, anchors, profiles, seals and roof-system hardware. | Details coordinate tolerance, thermal movement, waterproofing and installation access. |
| Drainage | Roof falls, perimeter gutters, channels, outlets and downpipes as applicable. | Discharge points must coordinate with the building and site drainage plan. |
| Foundation / Host | New foundations or verified existing concrete/steel supports. | Structural capacity, anchors, edge distances, waterproofing and utilities require verification. |
| Wind & Exposure | Project-specific wind, uplift, rain, heat and corrosion criteria. | Final criteria must be confirmed before engineering approval and fabrication. |
Performance matched to the project.
Click any material option to review its complete specification, benefits, applications and project-selection points.
01 · MEMBRANE SYSTEMPVC / PVDF Membrane
Premium coated architectural membrane with a clean finish and waterproofing capability when the approved system is correctly detailed.
CLICK FOR COMPLETE DETAILS →
What is PVC/PVDF membrane?
A polyester base fabric is coated with PVC for strength and weather protection, then finished with a PVDF surface layer to improve cleanability, color retention and resistance to dirt and environmental exposure. Product composition varies by manufacturer and approved grade.
Key performance benefits
- Suitable for waterproof parking canopies when seams, slopes, edges and drainage are correctly engineered.
- Strong architectural appearance with smooth tensioned surfaces and multiple color options.
- Project grades can be selected for UV resistance, tensile strength, fire classification and warranty requirements.
- Heat-welded or approved fabricated seams help create continuous membrane panels.
- Can be tensioned over cantilever steelwork using project-approved plates, cables, profiles and hardware.
Best suited for
Commercial parking, corporate facilities, hospitals, schools, industrial sites and premium villa projects requiring a refined, weather-protective membrane finish.
02 · BREATHABLE SHADE CLOTHKnitted HDPE
Breathable shade cloth focused on solar/UV reduction, heat ventilation and practical large-area coverage.
CLICK FOR COMPLETE DETAILS →
What is knitted HDPE?
HDPE shade cloth is manufactured from high-density polyethylene yarn in a knitted construction. It reduces direct solar exposure while allowing air movement and controlled rain penetration, helping heat escape from below the canopy.
Key performance benefits
- Breathable construction supports natural ventilation beneath parked vehicles.
- Practical for villa, school, employee, commercial and large parking areas.
- Available in different shade factors, GSM weights, colors and manufacturer warranty levels.
- Flexible fabric can be shaped and tensioned for cantilever, pyramid, sail and other systems.
- Generally lighter and more economical than coated waterproof membrane systems.
Important fire and UV note
UV block percentage, shade factor, tensile properties and warranty must come from the selected manufacturer’s certified datasheet. Standard knitted HDPE should not be described as fire-retardant unless the exact approved product has a valid fire-test classification.
03 · HIGH-PERFORMANCE MEMBRANEPTFE Membrane
Premium architectural membrane option for selected projects requiring enhanced durability, cleanability and specification compliance.
CLICK FOR COMPLETE DETAILS →
What is PTFE membrane?
PTFE architectural membrane commonly uses a woven glass-fibre base coated with polytetrafluoroethylene. It is specified for demanding tensile structures where long-term surface stability, fire performance and premium architectural quality are priorities.
Key performance benefits
- High resistance to UV exposure, weathering and many environmental contaminants.
- Low-surface-energy finish helps reduce dirt adhesion and supports easier cleaning.
- Suitable for large and prestigious architectural projects subject to approved engineering.
- Selected systems can provide strong fire-performance classifications.
- Stable premium appearance with controlled translucency depending on product grade.
Project considerations
PTFE requires specialist patterning, fabrication, packaging, installation and tension control. It is generally a higher-cost solution than HDPE or PVC/PVDF and should be selected with the consultant and approved manufacturer.
04 · STEEL PROTECTION SYSTEMHDG + Epoxy Steel
Corrosion-protection option combining hot-dip galvanizing with an approved epoxy/top-coat system where project conditions require it.
CLICK FOR COMPLETE DETAILS →
How the duplex protection works
After fabrication and required inspection, structural steel is hot-dip galvanized to provide a zinc protective layer. Where specified, compatible surface preparation and an approved epoxy/intermediate/top-coat system are then applied to achieve the required color and additional environmental protection.
Quality-control points
- Steel grade, weld quality and fabricated dimensions checked before finishing.
- Galvanizing preparation includes vent/drain detailing and surface condition review.
- Galvanizing thickness and coating system verified against the approved specification.
- Compatible preparation is required before applying epoxy over galvanized steel.
- Site damage, cut edges and installation touch-ups follow the approved repair procedure.
Designed around the actual site—not a generic product sketch.
Click each stage to review its inputs, engineering checks and typical project deliverables.
01 · SITE INPUTSSite & Layout
Parking-row geometry, column zone, clear height, traffic access, utilities, drainage and foundations.
Information reviewed before design
The Custom Multi-Bay system depends on coordinated canopy dimensions, support locations, canopy profile and primary-member geometry, membrane slopes, edge conditions and vehicle clearance. The review checks whether columns and foundations fit the approved parking plan without affecting vehicles, pedestrian routes, drainage, lighting or underground services.
- Bay width and depth, vehicle class, row arrangement and total quantity.
- Support zones, canopy elevations, primary-member lengths, membrane edge levels and module spacing, clear height and canopy projections.
- Traffic aisles, kerbs, walkways, ramps, boundaries and emergency access.
- Existing utilities, lighting, drainage, landscaping and obstruction zones.
- Foundation feasibility, soil information and restrictions on excavation.
- Crane, delivery, storage and installation access.
02 · LOAD PATHStructural Design
Balanced and unbalanced wind, uplift, members, connections, base plates, anchors and reactions.
Project-specific structural coordination
Membrane pretension, primary members, connection nodes and support columns transfer gravity, wind and uplift through the selected columns, connections, base plates, anchors and foundations. The design considers dead load, membrane pretension, wind pressure, suction, uplift, bending and connection demands for the approved geometry.
- Design basis, applicable code, wind speed and exposure category.
- Dead load, membrane pretension, wind pressure, suction and uplift combinations.
- Deflection, stability and behavior of columns, primary members, connections and support columns, beams and bracing.
- Welds, bolts, plates, stiffeners and membrane connection points.
- Base plate, anchor-bolt forces and project foundation reactions.
- Foundation design where soil data and scope are provided.
03 · APPROVAL PACKAGETechnical Submittal
Shop drawings, material data, samples, certificates, coating details and warranty documents as agreed.
Documents prepared for review
The submittal converts the approved commercial concept into coordinated information for the client, consultant, procurement and production teams. The exact package depends on the project requirement and contracted scope.
- General arrangement, dimensions, elevations, sections and setting-out.
- Steel fabrication details, connections, base plates and anchor layout.
- Membrane material datasheet, color/sample, UV, tensile and fire information.
- Steel grade, fastener, welding and coating/galvanizing documentation.
- Material certificates, COC, manufacturer warranty and test reports where required.
- Method statement, ITP, lifting plan and project-specific supporting documents.
04 · CONTROL & SAFETYQA/QC & HSE
Inspection points for fabrication, coating, delivery, erection, membrane tension and final handover.
Inspection and safe-delivery controls
Quality and safety checks are coordinated from material receipt through fabrication, coating, transport, erection and final membrane installation. Project hold/witness points follow the approved ITP and client requirements.
- Material identification, dimensional inspection and traceability where required.
- Cutting, fit-up, weld quality and fabrication tolerance checks.
- Surface preparation, galvanizing/coating thickness and repair inspection.
- Delivery condition, component identification and safe lifting arrangements.
- Column alignment, bolt tightening, temporary stability and connection completion.
- Membrane seams, hardware, tension, drainage, finish and snag closure.
Outdoor spaces planned for comfort and architectural value.
Villas, resorts, restaurants, gardens, pool areas and hospitality projects requiring a warm natural appearance.
Villas
Terraces, gardens, entrances and pool areas.
Hospitality
Hotels, resorts, restaurants and cafés.
Commercial
Retail, offices and customer-facing terraces.
Education
Schools, campuses and gathering areas.
Public Realm
Parks, walkways and community spaces.
Custom Projects
Site-specific architectural shade requirements.
From site information to final handover.
Click each stage to review the work scope. Programme depends on approved drawings, material availability, site readiness and the confirmed project scope.
01 · PROJECT INPUTSRequirement
Location, dimensions, quantity, vehicle types, shade preferences and available project documents.
Information required to define the project
The enquiry starts with enough verified information to select a suitable Custom Multi-Bay layout and prepare a responsible proposal.
- Project location, site access and client/consultant contact details.
- Parking-bay dimensions, total quantity, row arrangement and vehicle types.
- Required clear height, shade projection, column position and architectural preference.
- Preferred PVC/PVDF, HDPE or PTFE membrane and required steel finish.
- Site photographs, drawings, survey, BOQ, specifications and authority requirements where available.
- Required completion date, working hours and any operational restrictions.
02 · DESIGN & APPROVALEngineering
Site layout, design criteria, structural checks, shop details and required approvals.
Engineering coordination
- Coordinate parking layout, column setting-out, clearances, drainage, utilities and access.
- Confirm design basis, applicable code, exposure and project-specific wind criterion.
- Check members, deflection, connections, welds, bolts, base plates, anchors and reactions.
- Coordinate 155 KPH or 190 KPH design condition when specified in the agreed scope.
- Prepare calculations where contracted, shop drawings, material submittals and approval revisions.
- Provide foundation reactions or foundation design according to soil data and contracted responsibility.
03 · CONTROLLED PRODUCTIONFabrication
Material receipt, cutting, fit-up, welding, dimensional checks, finishing and identification.
Factory production sequence
- Receive and identify approved steel, plates, fasteners, membrane and accessories.
- Cut and prepare columns, arms, beams, braces, plates and connection components.
- Control fit-up, welding sequence, dimensional tolerances and required inspection points.
- Complete galvanizing, compatible epoxy/top coat, powder coating or specified paint system.
- Check finish condition, coating thickness and approved repair/touch-up requirements.
- Mark, protect, package and load components in the planned installation sequence.
04 · SITE EXECUTIONInstallation
Setting-out, foundation verification, controlled erection, alignment and membrane tensioning.
Installation and erection activities
- Verify approved setting-out, foundation levels, anchor positions, access and work permits.
- Coordinate delivery, unloading, lifting plan, exclusion zones and temporary stability.
- Erect columns and cantilever framing in the approved sequence.
- Check line, level, plumb, connection completion and specified bolt tightening/torque.
- Repair approved coating damage and protect completed steelwork.
- Install membrane panels, edge hardware and drainage details; apply controlled final tension.
05 · COMPLETION & RECORDSInspection
Connections, alignment, coating, membrane seams, tension, drainage, snags and handover.
Final QA/QC and handover review
- Inspect structural alignment, completed weld/bolt connections and accessible anchor interfaces.
- Review galvanized/coated surfaces, site repairs, finish quality and visible damage.
- Check membrane seams, attachment hardware, tension, edge finish and water-shedding details.
- Confirm clearance, drainage path, housekeeping and safe removal of temporary controls.
- Record and close punch-list or snag items according to the agreed acceptance procedure.
- Compile available inspection records, approvals, warranties and handover documents within scope.
Wood-Finish Aluminium Pergola FAQs.
Final answers depend on site conditions and the approved product system.
Is this pergola custom-made?
Yes. Dimensions, supports, roof type, drainage, color, accessories and interfaces are developed for the actual project.
Is the roof waterproof?
Only systems specifically designed and approved as waterproof should be described that way. Louvers, membranes, seals, slopes and drainage must be detailed as one system.
Which frame material is recommended?
Aluminium offers low weight and corrosion resistance; structural steel suits larger spans and custom fabrication. Final selection depends on design, exposure and budget.
Can lighting or automation be added?
Yes, when coordinated before fabrication. Electrical load, IP rating, wiring routes, control access and supplier requirements must be confirmed.
How is drainage handled?
Roof falls, gutters, channels, outlets and downpipes are coordinated with the building or site discharge points.
What warranty is available?
Coverage depends on the approved frame, finish, roof-system manufacturer, motors, workmanship, exposure and contract terms.
Do you supply across Saudi Arabia?
Yes. Site survey, engineering, fabrication and installation can be coordinated in Riyadh and across Saudi Arabia.
Compare alternative outdoor shade systems.
Select according to use, weather protection, architecture and operation.